Pocket Test Thermometer - -40 - 180F
- 1 diameter dial face
- 5 probe
- Includes protective sleeve with built-in clip
- Recalibrates for accuracy
Calibration Instructions:Calibration on this unit should done with a cold bath at 32F(0C) for a more accurate calibration.
- Fill cup with ice and top off with cold water and stir for 30 seconds.
- Insert probe into cup at least 1" deep for 15 seconds or until the temperature reading stabilizes. Keep the probe from touching the sides or bottom of the glass.NOTE: If the thermometer settles at 32F(0C), there is no calibration needed.
- Use pliers and adjust the calibration nut on the bottom of the dial and turn until it reads the proper temperature, 32F(0C).